Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Tel: 01483 208075  Mobile: 07966 546735

Stump Grinder JBM 2913 BD (13 hp)

Order No. 2913 010

 

 

The one-man machine for constant heavy use without tiring due to the KDS system

 

With 19 kW (25 h.p.) Kohler petrol engine

Electric starter

Battery

Operator handle bar height-adjustable to 5 positions

V-belt drive

Dead man’s switch

Magnetic clutch

Swivelling range: 1.30 m, due to KDS system

Brake-lowering valve

2 wheels driven with compensating hubs

3rd wheel = transport wheel

Wheel size: 4.80/4.00 - 8

Height: 970 mm length: 2300 mm width: 680 mm

Grinding wheel size: 395 x 12 mm

Number of cutting teeth, 18 videa-tipped teeth

Weight: 295 kg

Stump Grinder JBM 2925 BDH (50 hp)

Order No. 2925 010

 

The one-man machine for constant heavy use without tiring due to the KDS system

 

With 19 kW (25 h.p.) Kohler petrol engine

Electric starter

Battery

Operator handle bar height-adjustable to 5 positions

V-belt drive

Dead man’s switch

Magnetic clutch

Swivelling range: 1.30 m, due to KDS system

Brake-lowering valve

2 wheels driven with compensating hubs

3rd wheel = transport wheel

Wheel size: 4.80/4.00 - 8

Height: 970 mm length: 2300 mm width: 680 mm

Grinding wheel size: 395 x 12 mm

Number of cutting teeth, 18 videa-tipped teeth

Weight: 295 kg

 

 

Stump Grinder JBM 5950 DH (50hp)

Order No. 5950 010

 

With 37 kW (50 h.p.) Kubota 4 cylinder diesel engine

Electric starter, battery and operating time counter

Oil cooler, differential lock, handbrake

DUO lubricating system

Full hydraulic wheel drive, including grinding wheel, V-belt drive from the hydraulic motor to the grinding wheel

Travelling mechanism adjustable from the side and behind

Stop switch

Wheel widening possible (optional dual wheels)

Tank capacity: diesel 20 litres oil: 40 litres

Swivelling range: right and left: in 3 planes: forwards and backwards 1400 mm each, up and down

Width: 880 mm length without working arm: 2150 mm Length of working arm: 1200 mm

Grinding depth: 450 mm

Grinding wheel size: 500 x 15 mm

Number of cutting teeth, 24 videa-tipped teeth

Protective shield of the grinding wheel (splash guard) is hydraulically height-adjustable

Weight: 980 kg

Engine position integrated into the chassis and independent of grinding arm movements

Low centre of gravity and therefore less risk of tilting over

Optimum engine protection, as the engine does not follow the tilting movements of the grinding arm, hence longer engine life

 

 

Stump Grinder JBM 7600 (150 bhp)

Order No. 7600 010

 

For performances of 60 kW (80 h.p.) to 125 kW (150 h.p.)

Very stable and direct, propelled under power take-off 1000 rpm

Swivelling range: 1.98 m

Adjustable reach: 450 mm

Above ground level 550 mm

Below ground level 650 mm

Electrical joy stick operation with 4 m cables

Length: 2000 mm width: 1520 mm

Grinding wheel size: 760 x 38 mm

Number of cutting teeth, 40 videa-tipped teeth

Weight: 1,280 kg